Solutions
Enhance VVO / CVR
Support stronger voltage control and more efficient operation by improving phase balance across the distribution system.
Switched Source’s power electronics devices dynamically balance real and reactive power across phases, tightening voltage profiles so VVO and CVR programs have more room to work.
Better Voltage Control Starts With Better Balance
VVO systems coordinate tap changers, regulators, and capacitor banks to manage voltage across a circuit. Under conservation voltage reduction, they run voltage toward the low end of the allowable range to reduce energy use and demand. How far voltage can be reduced depends on the lowest voltage anywhere on the circuit.
One phase may experience higher loading than the others, and with it, more voltage drop along the feeder. That phase reaches the lower voltage limit first, typically toward the end of the circuit, while the more lightly loaded phases still sit well above it. Because regulator setpoints must keep the lowest phase within limits, the other phases are held higher than necessary.
The result is a wider voltage spread between phases and less margin for reduction. Narrowing that spread lifts the lowest phase off the lower limit, giving the program room to bring voltage down further across the circuit.
Call us when...
Phase imbalance is limiting your VVO program’s effectiveness.
Your efficiency program is falling short of its demand reduction targets.
You’re planning a VVO or CVR rollout and want to maximize its savings.
What You Unlock Over Traditional Solutions
VVO systems regulate voltage through the equipment they control, but they do not correct the imbalance that creates the spread between phases.
Switched Source technology works alongside those systems rather than replacing them. It transfers power between phases using power electronics, narrowing the voltage spread that regulation equipment has to work within. The tap changers, regulators, and VVO software a utility already owns can then hold a tighter voltage profile and, under CVR, bring voltage down further, delivering more savings from the same program.
More Demand Reduction from the Same Voltage Program
USE CASE · VOLTAGE OPTIMIZATION
VVO and CVR performance is capped by the highest and lowest phase voltages on a circuit: when one phase hugs the 116 V floor, the regulator setpoint is held artificially high even if the other phases have room to spare.
By pulling phase voltages together and lifting the constraining phase 1 to 2 V off the floor, the Phase-EQ gives regulators room to lower the setpoint circuit-wide.
Phase balancing delivers 0.5 to 1.5% more demand reduction than VVO or CVR can achieve on their own.* A more balanced feeder is simply a more efficient feeder.
* Findings from a 2020 EPRI study. Contact us for more information.