Solutions

Unlock More Grid Capacity

Serve growing loads and connect new demand by using existing distribution infrastructure more effectively.

Switched Source’s power electronics devices rebalance load across phases as demand changes, increasing load-serving capability without building new lines or substations.

Capacity Exists Elsewhere

Electrification, EV charging, distributed generation, and concentrated customer demand are creating increasingly uneven and unpredictable loading across distribution systems.

A feeder may still have available total capacity while one phase, lateral, or circuit approaches its operating limit. These localized constraints can delay new service connections, increase equipment stress, reduce operational flexibility, and trigger costly infrastructure upgrades before the full system is truly at capacity.

Call us when...

A feeder is loaded unevenly, and the upgrade is a year or more out.

One phase is at its limit while the circuit still has headroom.

Reconductoring or a line extension is the only option on the table, and the cost is hard to justify.

What You Unlock Over Traditional Solutions

Utilities have historically addressed capacity constraints by adding infrastructure: extending three-phase service along single-phase laterals, reconductoring overloaded sections, or building new feeders and substations.

While these remain necessary in many situations, Switched Source technology unlocks capacity today at a lower cost and deploys in months rather than years-long construction cycles. It balances load across phases automatically and continuously, so the circuit keeps pace with how load actually behaves through the day and across seasons. That means more of the existing system is usable, without trading away reliability.

Relieving Capacity Constraints at a Florida Utility

CASE STUDY · FLORIDA UTILITY

A large Florida utility faced circuits pushed to their limits: neutral currents above 100 A, voltage imbalance of 3 to 5%, long single-phase laterals stressing the weakest phases, and mounting customer power quality complaints.

Traditional fixes — rebuilding lines, extending three-phase, reconductoring — meant heavy CapEx and years of delay. Modeling across four circuits showed the Phase-EQ unlocking an average of ~900 kW of additional load-serving capability per circuit, with up to 2.2 MW on the strongest candidate.

At a later pilot on a separate circuit, real feeder-head data confirmed the effect: at high feeder loads (~10 MVA), the Phase-EQ creates 1 to 1.5 MW of headroom by flattening three-phase loading.

Without Phase-EQ
With Phase-EQ

Related Resources