Solutions

Simplify Operations

Reduce field work, engineering time, and planned outages by letting circuits rebalance themselves as loading changes through the year.

Switched Source technology brings phase balancing into distribution automation, rebalancing load automatically as seasonal loads come and go so crews aren’t manually rebalancing the same circuits every season.

Seasonal Changes Mean Seasonal Challenges

Seasonal loads can drive one phase into severe imbalance in winter and a different phase in summer. Air conditioning, heat pumps, irrigation pumps, and grain dryers all run on their own calendars, and they don’t always land evenly across phases.

The result is a circuit whose constraint moves with the calendar. Neutral current, voltage imbalance, and equipment stress build on one phase for part of the year and on another for the rest, and the worst of it tends to arrive at seasonal peak, exactly when the circuit can least afford it.

Call us when...

Seasonal loads like harvest equipment or a winter population surge push a circuit out of balance for part of the year.

Rebalancing a circuit multiple times a year is straining your OpEx budget.

Every manual rebalance means scheduling another planned outage for your customers.

What You Unlock Over Traditional Solutions

Utilities typically handle seasonal imbalance in one of two ways. They rebalance manually as needed, which takes engineering time, crew time, and often a planned outage, and the result is only right until the next season arrives. Or they size the circuit for each season’s worst case, building in excess capacity that sits unused for much of the year.

Switched Source technology rebalances load automatically across seasons, keeping a circuit balanced throughout the year without another crew visit or an oversized circuit. Installation itself requires no customer outage. Rebalancing becomes a planning decision rather than a recurring maintenance task, and the engineering hours, truck rolls, and outages that went with it are freed up.

Balancing Through Harvest

CASE STUDY · IOWA UTILITY

On a rural Iowa circuit, seasonal grain dryer loads drove significant imbalance and power quality problems every harvest.

The Phase-EQ rebalanced the circuit automatically as the dryers cycled on and off, reducing upstream neutral current by up to 119 A and cutting maximum voltage imbalance from 4.4% to 2.5%, without a larger infrastructure upgrade. With phase voltages closer together, the circuit’s voltage regulators no longer had to tap unevenly to compensate.

Related Resources